The Sweeper system is designed to automatically remove material from a gaylord type container without the need for human intervention. 

How It Works:

The Sweeper gets its name from the fact that it continuously "sweeps" the top level of the contents of the gaylord to the outer edges. The material is vacuumed up by a slotted pickup tube that is attached to the end of a flexible suction hose. The whole lower section descends and rotates in a way that forces the pickup tube to vacuum up the material without interruption, including the material that is swept into the corners of the container. Ultimately, less than a handful of scattered pellets remain.

• A sturdy structural steel stand that straddles the gaylord allowing easy front access. 
• A set of vertical "rails" carry a "trolley" up and down above the gaylord. 
• The trolley carries a fixed, standard 1.5 inch aluminum material conveying tube, and is coupled to a second tube below, that rotates. 
• The lower rotating tube is driven by a gear motor, at about 1 RPM.
  
• A 3 foot, flexible vacuum hose has a short slotted pick up tube at the end to effectively vacuum up the pellets. 
• Pellets in the center are "swept" to the outside by a cross member, that serves as the "sweeper".
  
• As the vertical tube rotates, the flexible portion is dragged across the top of the pellets, in a swept back trailing manner, reaching into each corner and repeatedly vacuuming pellets from the sides and corners.
  
• A counter balanced spring-loaded cable prevents the weight of the trolley from becoming buried in the resin.

Main Features

• Automatic material removal
  The sweeper's rotating action moves resin to a slotted pickup tube to be vacuumed out of the container.
• Reduces labor
  No one has to manually move the pickup tube because resin is constantly moved to the vacuum point.
• Reduces waste
  Effective material removal keeps resin from being thrown away.
• Small footprint
  Footprint is slightly more than the gaylord being unloaded.
• Safer than a tilt table
  The sweeper has no heavy-duty hydraulics with pinch points and low torque and rotation speed provide inherent safety - no guards required.
• Easy placement of resin containers
  A pallet jack can move the container into position...no forklift required.
• Lower installation and operation costs
  The Sweeper requires no compressed air and operates on 115 V electricity, drawing less than 2 amps.
• Signal lights
  Lights indicate when the unit is "ON" and when it is rotating.
• Energy savings / extended motor life
  A vacuum switch allows the unit to operate only while your vacuum system is pulling material. Thus, this system is always ready, never has to be manually started or stopped. There is a Jog button to rotate the unit manually.